ABB DELTAplus Montage- Und Bedienungsanleitung Seite 94

Setting time
(Meters with internal clock only)
Step Action
S
A1 Press
B1 Press S
2 Press
Sc
S
3 Press
4 Press Sc
S
5 Press
6 Press
Sc
S
7 Press
Sc
8 Press
S
9 Press
Sc
10 Press
S
11 Press
LSc
12 Press
A1 in the table above only transformer connected meters.
B1 in the table above only direct connected meters.
Display shows
x 1 Ct 1
x 1 P 100
x n --_--.-- if time not
set,
hh_mm.ss if time
set
x 1 hh_mm.ss
x n hh_mm.ss
x 1 hh_mm.ss
x n hh_mm.ss
x 1 hh_mm.ss
x n hh_mm.ss
x 1 hh_mm.ss
x n hh_mm.ss
x 1 hh_mm.ss
hh_mm.ss
To SET mode.
To SET mode.
To time menu. Repeat
press Scrollbutton until
time menu is displayed
Activates SET mode,
hand and hour starts to
blink
Set hour. Repeat press
Scrollbutton until the
correct hour is displayed
Accepts hour
Hand and minute 10´s
digit blinks. Repeat press
Scrollbutton until the
correct 10´s digit
is displayed
Accepts minute 10´s digit
Hand and minute unit
digit blinks. Repeat press
Scrollbutton until the
correct digit is displayed
Accept minute unit digit
Hand and second digits
blinks. Second are set to
0 each time the
Scrollbutton is pressed
Accept second digits
Back to normal mode.
92
Result