Repair Service; Waste Disposal And Environmental Protection; Ec Declaration Of Conformity - Mantis 8520-00-38 Originalbetriebsanleitung

Attention: If the power supply lead of this
device shows any defects, the lead must be
replaced by an authorized repair shop only
or through the manufacturer's own service
personnel, as this work requires special tools.

11. Repair Service

Repairs to electric power tools should only be carried out
by specialist electrical personnel.
UK Mantis UK Limited
Orchard House
Hempshaw Lane
Stockport
Cheshire SK1 4LH
Phone - 4401614741525
Europe Mantis France SARL
20 rue des Garennes
Marly
France
51755
Phone - 330387628888
12. Waste disposal and environmental protec-
tion
If your chain saw should become useless somewhere
in the future or you do not need it any longer, do not
dispose of the device together with your domestic refuse,
but dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according col-
lecing/ recycling point. By doing so, plastic and metal
parts can be separated and recycled. Information con-
cerning the disposal of materials and devices are avail-
able from your local administration.
GB | Operating Instruction

13. EC Declaration of Conformity

We, MOGATEC Moderne Gartentechnik GmbH, Im
Grund 14, 09430 Drebach, declare under our sole
responsibility that the product Chain saw 8520-00-38
UK / 8520-00-40 Europe, to which this declaration re-
lates correspond to the relevant basic safety and health
requirements of Directives 2006/42/EC (Machinery Di-
rective), 2004/108/EC (EMV-Guideline)and 2000/14/EC
(noise directive) incl. modifications.
implementation of the safety and health requirements
mentioned in the Directives, the following standards and/
or technical specification(s) have been respected:
DIN EN 60745-1 (VDE 0740-1):2010-01
EN 60745-1:2009
DIN EN 60745-2-13 (VDE 0740-2-13):2009-12
EN 60745-2-13:2009
DIN EN ISO 14121-1:2007; EN ISO 14121-1:2007
DIN EN 62233
DIN EN 55014-1 (VDE 0875 Teil 14-1):2007-06
EN 55014-1/A1:2009
DIN EN 55014-2 (VDE 0875 Teil 14-2):2002-08
EN 55014-2/A2:2008
DIN EN 61000-3-2 (VDE 0838 Teil 2):2006-10
EN 61000-3-2/A2:2009
DIN EN 61000-3-11 (VDE 0838 Teil 11):2001-04
EN 61000-3-11:2000
Anforderungen der Kategorie I / Requirements of
category I; Requirements of category I,
Engineering type licence No. 1028 MSR,
VDE Offenbach (0366)
measured acoustic capacity level 102,3 dB(A)
granted acoustic capacity level
Conformity assessment method to annexe V / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be addition-
ally retrieved via the consecutive serial number.
Münster, 25.05.2011
Gerhard Knorr, Technical Management Ikra GmbH
CE Conformity Officer Mogatec GmbH
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße
57, DE-64839 Münster
GB-9
For the relevant
104,0 dB(A)