Raikko EVOLUTION Bluetooth Bedienungsanleitung Seite 9

English
oVeRVIeW
4. Bluetooth ® /start-stop
3. Volume +/forward
2. Volume –/back
9. Microphone
1. Power switch
6. USB port
5. Charging socket
(Micro-USB)
to ACtIVAte/ConneCt
Press the power switch (1) for about 3 seconds to turn the device on.
When it has been switched on, the device will be in 'pairing
mode'. The status LED on the top of the EVOLUTION BT
alternately blue and red. Activate the Bluetooth
smartphone, mobile or computer (terminal/audio playback device)
and use this to pair with the EVOLUTION BT
your PIN, enter '0000'. A solid blue light on the status LED shows
16
®
EVOLUTION Bluetooth
11. Reset button
10. Status LED
7. LED battery indicator
8. Line IN connection
will flash
®
interface on your
®
. If you are asked for
®
English
that there is a connection. The terminal/audio playback device will
be recognised when it connects again in the future. For additional
information, please refer to the instructions provided with your
terminal/audio playback device.
sWItCHInG oFF/DIsConneCtInG
To turn the EVOLUTION BT off, press the power switch for about
®
3 seconds.
oPeRAtIon WItH An estABLIsHeD BLUetootH
If a connection has been established, you have the option to
playback music or other audio streams via the EVOLUTION BT
You can either adjust the volume via the volume controller on
your terminal/audio playback device or on the EVOLUTION BT
Press the '+' (3) and '–' buttons until you reach the desired volume.
You will hear a beep if you have reached the maximum volume.
The maximum volume is set after the EVOLUTION BT
switched on.
You can also control the playback functions remotely from the
EVOLUTION BT , provided that the paired device (terminal/audio
®
playback device supports this function. For additional information,
please refer to the instructions provided with your terminal/audio
playback device. To play or stop, press the 'Bluetooth
once briefly. To skip to the next track, press the '+ button' (3) once
briefly. To play the current track again, press the '– button' (2) once
briefly. Pressing the button twice or more takes you back to the
previous track. When using Bluetooth
beep every 10 minutes when battery capacity is below 25 %.
EVOLUTION Bluetooth
ConneCtIon
®
.
®
.
®
has been
®
button' (4)
®
-mode an acoustic signal
®
17
®