Warning Signals; Safety Warnings - Bertolini 140 Bedienung Und Wartung

WARNING SIGNALS

This symbol is to attract your
attention and indicates that
care for your safety must be
meticolously followed , and must be brought to
the attention of all those who use the machine.
This manual of instructions is part of the Use
and Maintenance Manual supplied with the
machine and by the engine manufacturer, a
copy of which is supplied with every machine.
Consult the Use and Maintenance manual
when you see this symbol on the
machine.
ATTENTION!
scalding.
ATTENTION! - Keep children
away from the machine.
ATTENTION! - Danger due to
blades in operation. Keep hands
and feet clear.
ATTENTION! - Danger due to
blades in operation and rotating
parts. Keep hands and feet clear.
ATTENTION! - Danger of fi re.

SAFETY WARNINGS

1) This machine has been designed and
manufactured for being used by one operator
only, and is driven by means of the appropriate
handlebars.
Any other use is not permitted.
2) Before operating the machine, read the
Use and Maintenance manual thoroughly, so
that you are fully aware of all the operating
controls and safety aspects of the machine.
3) Do not under any circumstances transport
people or objects on the machine.
4) Always ensure that the machine's safety
devices are correctly mounted and in perfect
working condition.
5) Before use, check that all the controls, in
- Danger of particular the clutch, the Motorstop and the
brakes (if fi tted) are in good working order.
6) Any modifi cations or spurious parts being
fitted without the manufacturers consent
will nullify the guarantee, and any possible
resulting damage will not be answered for.
7) This machine must not be used by children
or inexperienced persons.
8) Before operating the machine, check that
the area is clear and free of debris and that
there are no people within the working area
(danger zone). The operator will be held
responsible for the safety of third parties, if
these are found within the working area of
the machine. Do not use the machine under
these conditions.
9) Keep clear of the cutting blades at all
times while the machine is in operation. Pay
particular attention when reversing; keep
hands and feet clear.
10). Use the machine only with the handles
in the correct working position. This
allows a safe working distance between the
operator and operating area.
32