Faema MD3000 Gebrauch Und Installation Seite 21

GENERAL
The manufacturer disclaims all liability for
damages to items or persons due to improper
use or due to the coffee machine being used
for purposes other than its intended use.
Never operate the appliance with wet hands or
naked feet.
Ensure that the appliance is not used by children
or persons who have not been instructed in its
correct use.
THERMAL PROTECTOR
The thermal protector cuts in if the motor gets
overheated due to malfunction.
Allow the appliance to cool down before switching
it on again.
If the problem is repeated, call the authorized
servicing department.
If the machine is not working properly, turn off the
machine, turn off the main off-on switch, and call
the service centre.
If the power-supply cord is damaged, switch off
the machine and request a replacement from the
service center.
To ensure safety during operation, it
is absolutely necessary to:
• follow all the manufacturer's instructions;
•
periodically check that all safety devices
are intact and functioning properly (the
purchase and every year after that).
5. Caution
COFFEE STORAGE
Always use fresh coffee beans and store in jars
or waterproof, sealed bags. Keep away from light
sources and store in a cool, dry place.
Try to use up all the coffee in the doser at the
end of the working day since it can lose its aroma
and spoil.
out of hours), carry out the following steps:
•
•
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions, damage to property and/
or injury to persons.
6. Maintenance and Repairs
repairs.
WARNING
Only use original spare parts guaranteed by
the manufacturer.
If original spare parts are not used, the
manufacturer warranty will no longer be valid.
WARNING
After maintenance, perform the installation
of the user's manual.
5 EN
MACHINE CLOSE-DOWN
When the machine is left unattended
for a prolonged period (for example
Remove the plug or turn off the main
switch;
Empty the coffee beans receptacle and
the ground coffee doser.
WARNING
jeopardize the safety and conformity of
the machine.