Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PREPARATION AND USAGE OF ThIS DEvIcE
Prior to using the device for the first time, we recommend cleaning it as described in the section «Cleaning and
Disinfecting».
1
Assemble the nebuliser kit (11). Ensure that all parts are complete.
2. Fill the nebuliser with the inhalation solution as per your doctor's instructions. Ensure that you do not exceed
the maximum level.
3. Connect the nebuliser with the air hose (6) to the compressor (1) and plug the power lead (2) into the socket
(230V~ / 50Hz).
4. Switch the ON/OFF switch (3) to position «I» to turn on the device and place the mouthpiece (7) in the mouth
or fit one of the face masks over mouth and nose.
• The mouthpiece gives you a better drug delivery to the lungs.
• Choose between adult (8) or child face mask (9) and make sure that it encloses the mouth and nose area
completely.
• Use all accessories including the nose piece (12) as prescribed by your doctor.
5. Breathe in and out calmly during the therapy. Sit in a relaxed position with the upper body upright. Do not
lie down while inhaling. Stop inhalation if you feel unwell.
6. After completing the inhalation period recommended by your doctor, switch the ON/OFF switch (3) to position
«O» to turn off the device and unplug it from the socket and always disconnect the air hose (6) from both,
the compressor and the nebuliser.
7. Empty the remaining medication from the nebuliser and clean the device as described in the section «Clea-
ning and Disinfecting».
This device was designed for intermittent use of 20 min. On / 40 min. Off. Switch off the device after
20 min. use and wait for another 40 min. before you resume treatment.
14
Werbung
Inhaltsverzeichnis
