Operation; Control Panel; Switching Off; Temperature Regulation - AEG ABB68811LS Benutzerinformation

3. OPERATION

3.1 Control panel

Power indicator light
1
Temperature regulator
2
FROSTMATIC light
3
FROSTMATIC switch and alarm reset
4
switch
3.2 Switching on
Connect the appliance to the main
power supply.
1. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up
and a sound will signal for 2 seconds.
If the temperature inside the
appliance is too high, the
Alarm light will blink and the
sound signal alarm will turn
on.
2. Push the FROSTMATIC switch and
the sound signal alarm will get off.
3. Push the FROSTMATIC switch once
again and the FROSTMATIC light will
light up. The appliance will start to
operate.

3.3 Switching off

Turn the Temperature regulator to the
"O" position and a sound is on only for 2
seconds .
The power indicator light will switch off.

3.4 Temperature regulation

The temperature is regulated
automatically.
1 2 3 4 5
Alarm light
5
A medium setting is
generally the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance
depends on:
• room temperature,
• how often the door is
opened,
• the quantity of food
stored,
• the location of the
appliance.
1. Turn the Temperature regulator
toward lower settings to obtain the
minimum coldness.
2. Turn the Temperature regulator
toward higher settings to obtain the
maximum coldness.
ENGLISH 19