Instruction - Herth+Buss 95980775 Bedienhinweis

Operating Instruction

Instruction

EN
1
2
3
4
5
1. Display
3 ⁄ -digit LCD, with a max. reading of 3999.
3
4
2. "Range" Button
It can be used to switch the Meter between
autorange mode and manual range mode. It
can also be used to select desired range.
3. "CYL " Button
It can be used to select number of engine
cylinders.
www.herthundbuss.com
6 7 8 9
4. "FUNC" Button
In voltage or current measurements, this but-
ton can be used to select ac or dc function.
When the rotary switch is in "
this button can be used to select resistance,
diode or continuity measurement.
5. Function/Range Switch
It can be used to select the desired function
and range as well as to turn on or off the
12
meter.
11
6. "10A" Jack
10
Plug-in connector for the red test lead for
current ( 400mA-10A ) measurements.
7. "AmA C F" Jack
Plug-in connector for the red test lead for
temperature and current ( < 400mA ) meas-
urements.
8. "COM" Jack
Plug-in connector for black (negative) test
lead.
9. Jack
Plug-in connector for the red test lead for all
measurements except current and tempera-
ture measurements.
95980775
" position,
26