Werbung
Automatic Fire Detectors
2.3
Removing the individual display
Carefully press the detector's individual display inwards to remove from the detector cover.
2.4
Painting the detector cover
Paint the detector cover. Ensure the color is applied evenly and avoid paint thicknesses of
over 0.1 mm. Only fit the detector when the paint is completely dry. Please also refer to the
paint's Technical Data Sheet and Safety Data Sheet in Appendix 1 and 2.
NOTICE!
Use D PUR PLUS texture paint 2K; see Appendix 1 and 2.
2.5
Fit the detector
Press the detector's individual display into the designated fasteners. Guide the detector head
back into the detector cover and ensure that all four snap-fit hooks click audibly into place in
the detector cover. The detector cover has a protective mechanism to prevent the detector
head from being fitted incorrectly. The detector head can only be fitted when the plastic lug
on the detector cover is aligned with the notch on the detector head.
Bosch Sicherheitssysteme GmbH
Painting Guide
| en
7
F.01U.089.231 | 4.0 | 2011.07
Werbung
