Forch Startium 680E Bedienungsanleitung Seite 27

Start-Charger Startium 680E
ENG
Operating panel
1. Start mode
2. Display
3. Display in minutes
4. Display in volt
5. Display in percent
6. Error-LED
7. LED signals that this selection is active (terminals are under voltage)
8. LED indicating connection to a 24V battery
9. Push-button for activating the selection
10. LED indicating connection to a 12V battery
11. LED indicating the possibility of setting the data
12. Push-button for setting the battery type
13. Push-button for setting the charging rate
14. TIMER button
■
Note: The display is not a measuring instrument, it only indicates the voltage. Calibration
is not possible.
DESCRIPTION
The Start Charger STARTIUM is suitable to charge and to start all 12V (6 elements) and 24V
(12 elements) lead-acid battery types:
Assembly of handle and wheels: