Abus TVCC80000 Bedienungsanleitung Seite 35

CHROMA SUPPRESS
SATURATION
CONTRAST
HLC
GAIN LIMIT
MOTION PARAMETER
AUTO FLIP
PROPORTIONAL PAN
PARK TIME
PARK ACT
SCAN SPEED
IMAGE FREEZE
DOME SPEED
PRESET SPEED
LIMIT STOP
SETTING STOPS
CLEAR STOPS
ELEVATION SET
Function
AUTO FLIP
PROPORTIONAL PAN
PARK TIME
PARK ACT
SCAN SPEED
IMAGE FREEZE
DOME SPEED
Colour reduction in low-light conditions. The higher the
value, the weaker the light and the less colour is present in
the image.
Saturation (0–7)
Contrast (0–7)
The function for inversion of bright areas in the image is
active (High Light Compensation). Very bright areas
will be inverted to black above a certain brightness
value (such as car headlights, etc.) (0–3).
Setting for the gain of the image signal. The following values
can be set: 0–15.
ON
ON
5
NONE
28
OFF
8
8
OFF
-
-
OFF
Description
Activate the Auto Flip function. This function is helpful when
people are directly under the dome.
ON: The pan and tilt speed is controlled depending on the
zoom setting. We recommend you use this setting.
OFF: There may be difficulties following people when there
is a high zoom factor.
After a certain period (5–720 seconds) of inactivity, the
dome can perform the following functions.
One of these functions can be performed after the set time
elapses:
Preset 1–8, Pattern 1–4, Pan Scan, Tilt Scan, Random
Scan, Frame Scan, Panoramic Scan, Day Mode or Night
Mode.
Setting of the scan speed:
1–40°/sec.
The function freezes the live image during start of one. This
reduces the network load in networks. In addition, private
areas can be hidden.
The speed of the dome can be selected between HIGH,
MEDIUM and LOW.
35