Chauvet DJ EZpar 64 RGBA Schnellanleitung Seite 3

EN
What Is
Included
To Begin
Description
Overview
AC Power
Power Linking
Fuse
Replacement
·
EZpar™ 64 RGBA
·
Infrared Remote Control (IRC)
·
Power Cord
Unpack your EZpar™ 64 RGBA and make sure you have received all parts
in good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The EZpar™ 64 RGBA is a battery-operated, cable-free RGBA LED Par. The
rechargeable lithium battery lasts up to 20 hours from a single charge. Two
personality choices are available through 4- and 8-channel DMX modes. Control
options are built-in auto programs, Sound-Active modes, Master/Slave mode,
and DMX. Built-in infrared technology offers wireless control with the included
Infrared Remote Control (IRC) for non-DMX operation.
Battery Charged
Green Indicator Light
Battery
Charging
Red
Indicator
Light
Menu
Buttons
Power Switch
Back Panel View
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 55 EZpar™ 64 RGBA products at 120 VAC and 85 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
·
Warranty Card
·
Quick Reference Guide
Microphone
Menu Display
3
EZpar™ 64 RGBA QRG
DMX Out
DMX In
Power In
Fuse
Holder
Power Out