Klein Tools CL900E Gebrauchsanleitung Seite 8

ENGLISH
MAX/MIN
When the 'MAX/MIN' button
of the maximum and minimum values, as the meter continues to
take samples.
1. When measuring, press the 'MAX/MIN' button
between the maximum value (MAX) and the minimum value
(MIN). If a new maximum or minimum occurs, the display will
update with the new value.
2. Press the 'MAX/MIN' button
return to normal measuring mode.
INRUSH CURRENT
Rotate the Function selector switch
and press INRUSH
current. While the meter monitors current waiting for the inrush
event, '----' will be visible on the display.
NON-CONTACT VOLTAGE TESTING
Press and hold the 'NCV' button
the integrated non-contact voltage tester. Approach the conductor
under test leading with the sensing antenna
visual warning signals via the LED indicator
(beeps) when AC voltage is detected. Release the 'NCV' button to
exit NCV testing mode.
NOTE: We do not recommend performing continuity and NCV
testing simultaneously, as both tests use the same audible signal,
making it difficult to resolve which test is responsible for the
audible alarm.
NOTE: Only voltages of 90 V AC or greater will be detected.
8
FUNCTION BUTTONS
is pressed, the meter keeps track
8
8
prior to an inrush event to test for inrush
10
13
for more than one second to
to the Current A
2
to test for AC voltage using
. The meter delivers
14
and signals audibly
15
to toggle
8
setting