Klein Tools CL2500A Bedienungsanleitung

ENGLISH
Non Contact Voltage (NCV): > 25V AC
8.
PRESS &
PRESS &
HOLD
HOLD
SYMBOLS USED ON LCD
AC Measurement DC Measurement
-
AT
Negative DC Value Auto Range Active
O.L. Apo
Overload: Range Exceeded Auto Power-Off Active
Low Battery HOLD Hold Active
MIN MAX
Minimum Reading Maximum Reading
%
Duty Cycle Mode Frequency Mode
V A
Voltage Measurement Current in Amps
Ω
Resistance in Ohms Diode Test
F
Capacitance in Farads Continuity Test
n
Relative / Zero Mode
Nano 10 -9
µ m
Micro 10 -6 Milli 10 -3
k M
Kilo 10 3 Mega 10 6
ELECTRICAL SPECIFICATIONS
DC Voltage Measurement
Range Resolution Accuracy
600mV to 600V 0.1mV to 0.1V ± (0.5% + 4 digits)
1000V 1V ± (0.8% + 10 digits)
Overload Protection: 1000V
AC Voltage Measurement
Range Resolution Accuracy
600mV to 750V 0.1mV to 1V ± (2.0% + 5 digits)
Overload Protection: 750V RMS
Frequency Response: 45 to 400 Hz
Minimum Voltage for Frequency Measurement: 2.5V RMS
Response: True RMS
DC Current Measurement
Range Resolution Accuracy
600µA 0.1µA
± (1.2% + 3 digits)
2000µA 1µA
60A 0.01A ± (2.5% + 15 digits)
600A to 1000A 0.1A to 1A ± (1.5% + 8 digits)
Overload Protection:
Voltage: 600V RMS
•
Current: Leads 2000µA, Clamp 1000A
•
AC Current Measurement
Range Resolution Accuracy
600µA 0.1µA ± (2.0% + 5 digits)
2000µA 1µA ± (1.5% + 5 digits)
60A 0.01A ± (2.9% + 15 digits)
600A to 1000A 0.1A to 1A ± (1.9% + 8 digits)
Overload Protection:
Voltage: 600V RMS
•
Current: Leads 2000µA, Clamp 1000A
•
Frequency: 45 to 400Hz
Minimum Current for Frequency Measurement: Leads 400µA, Clamp 20A
Response: True RMS
Resistance Measurement
Range Resolution Accuracy
600Ω to 6MΩ 0.1Ω to 0.001MΩ ± (1.0% + 4 digits)
± (2.0% + 4 digits)
60MΩ 0.01MΩ
Overload Protection: 600V RMS
Capacitance Measurement
Range Resolution Accuracy
60nF to 6000µF 0.01nF to 1µF ± (3.5% + 6 digits)
Overload Protection: 600V RMS
Frequency Measurement
Range Resolution Accuracy
99.99Hz to 499.9kHz 0.01Hz to 100Hz ± (0.1% + 4 digits)
Overload Protection: Sensitivity:
600V RMS 2.5V RMS
Duty Cycle Measurement
Range Resolution Accuracy
1.0 to 99.0% 0.1% ± (0.1% + 5 digits)
Overload Protection: 600V RMS Sensitivity: 1.2Vpp to 50Vpp
Frequency Range: <500 Hz
Diode Test
Overload Protection Range Test Current Open Circuit Voltage
600V RMS 6.0V Appx. 0.25mA < 1.8V DC
Continuity Test
Overload Protection Open Circuit Voltage Threshold (Appx.)
< 0.44V
600V RMS to 40Ω
Non Contact Voltage Detector
On Voltage
Appx. 25V AC and above
WARRANTY
www.kleintools.com/warranty
CLEANING
Turn instrument off and disconnect test leads. Clean the instrument by using
a damp cloth. Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period of
time. Do not expose to high temperatures or humidity. After a period of storage
in extreme conditions exceeding the limits mentioned in the Specifications
section, allow the instrument to return to normal operating conditions before
using it.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items
must be properly disposed of in accordance with local regulations.
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
139883 Rev. 11/14 C 139883 Rev. 11/14 C
CL2500A
ENGLISH
INSTRUCTION MANUAL
1000A AC/DC TRMS Clamp Meter
• NON CONTACT
VOLTAGE TESTER
• TRUE RMS
• AUTO / MANUAL
RANGE
• MAX / MIN / HOLD
• ANALOG BAR GRAPH
• BACKLIGHT
• WORKLIGHT
• 3-5/6 DIGIT
5999 COUNT LCD
750V
1000V
1000A