Description Of The Device; Features - Futurelight DMH-75 Infinity Bedienungsanleitung

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.

DESCRIPTION OF THE DEVICE

Features

High performance LED Moving Head with 72 W LED and unlimited PAN and TILT movement
• 1 extra bright 72 W LED for best luminance
• High PAN/TILT speed and unlimited PAN/TILT movement
• Supports RDM (Remote Device Management)
• 12, 14, 16 or 18 DMX channels selectable
• Beam angle between 13° and 18° adjustable
• Effect wheel with rotating 3-facet prism
• Color wheel with 8 different dichroic color filters plus white
• Rainbow effect with adjustable speed in both directions
• Gobo wheel with 7 rotating gobos plus open
• All gobos can be interchanged
• Slot-in gobo system for exchanging gobos without tools
• With gobo shake function
• Exact positioning via 16 bit PAN/TILT movement resolution
• Motorized focus
• Dimmer
• Strobe effect with adjustable speed
• Random strobe effect
• Automatic position correction
• Sound-controlled via built-in microphone
• Control board with graphic LC display and foil-keyboard for adjusting the DMX-starting address, PAN/TILT
reverse, reset
• DMX-controlled operation or stand-alone operation with Master/Slave function
• Number of scenes can be changed individually
• The scenes can be modified via the Control Board or via an external controller and loaded into the memory
• Software upload by optional accessories via DMX link
• Switch-mode power supply for operation between 100 and 240 Volts
• Power connection via Neutrik PowerCon jack and included power cable
• Feed-through output allows to power up to 8 devices
• DMX control via every standard DMX controller
33/54 00081673.DOC, Version 1.0