Warning Symbols - Beko DR 8534 GX0 Bedienungsanleitung

Dryness settings selection
Dryness settings button is used for
adjusting to desired dryness. Program time
may change depending on the selection.
C
NOTE
• You can activate this function only prior
to start of program.
Drying level damp
Drying level normal
Drying level extra

5.8 Warning symbols

C
NOTE
• Warning symbols may vary depending on
the model of your machine.
42
Fibre filter cleaning
When the program is completed, the warning
symbol for filter cleaning turns on.
C
NOTE
• For detailed information, See 6
Maintenance and cleaning.
• If filter cleaning symbol constantly flashes
See.7 Troubleshooting.
Emptying the water tank
When the program is completed, the warning
symbol to empty the water tank turns on.
C
NOTE
• For detailed information, See 6
Maintenance and cleaning.
If the water tank fills up while the program
continues, the warning symbol starts flashing
and the machine goes into stand-by. In this
case, empty the water tank and start the
program by pressing the Start / Stand-by
button. Warning symbol turns off and program
resumes.
Cleaning the filter drawer
Warning symbol flashes to remind that the filter
drawer needs to be cleaned.
C
NOTE
• For detailed information, See 6
Maintenance and cleaning.
Dryer / User Manual