Warning Symbols - Beko DS7433PXW Bedienungsanleitung

C
NOTE
• You can select this function before or
after the program starts.

5.7 Warning symbols

C
NOTE
• Warning symbols may vary according to
the specifications of your machine.
Fiber filter cleaning
When the program is completed, a warning led
lights up, which indicates that the filter has to
be cleaned.
C
NOTE
• If the filter cleaning led blinks, see the
„Troubleshooting" chapter.
Water tank
When the program is completed, a warning led
lights up, which indicates that the water tank
must be emptied.
If the water tank fills up while the program is
running, warning led starts blinking and the
machine goes into stand-by. In that case
empty the water in the water tank and start
the program by pressing the Start / Pause
button. Warning led turns off and the program
resumes.
Loading door open
Start/Pause led blinks when the loading door of
the drying machine is open.
38
5.8 End duration
You can delay the end duration of the program
for up to 24 hours with the end duration
function.
1. Open the loading door and place your
laundry.
2. Select the drying program.
3. Press the end duration selection button
and set the delay duration you want.
End duration led lights up. (End duration
moves continuously when you keep
pressing the button).
4. Press the Start / Pause button. End
duration countdown begins. The ":"
sign in the middle of the displayed delay
duration blinks.
C
NOTE
• You can add or remove laundry for
the duration of the end duration. The
duration displayed on the screen is
the sum of the normal drying duration
and the end duration. At the end of the
countdown the end duration led turns off,
drying beings and drying led lights up.
Changing the end duration
If you want to change the duration during the
countdown:
1. Cancel the program by pressing the On/
Off button. Turn on the drying machine
again by pressing the On/Off button.
When your drying machine turns on
for the first time, it turns on with the
declaration (cotton wardrobe dryness)
program.
2. Select the program you desire using the
Program Selection knob.
3. Repeat the end duration operation for the
duration you want.
4. Start the program by pressing the Start /
Pause button.
Canceling the end duration function
If you want to cancel the end duration setting
countdown and start the program right away:
1. Cancel the program by pressing the On/
Off button. Turn on the drying machine
again by pressing the On/Off button.
When your drying machine turns on
for the first time, it turns on with the
declaration (cotton wardrobe dryness)
program.
Dryer / User Manual