Auxiliary Functions; Warning Symbols - Beko DH 8533 GA0 Bedienungsanleitung

perating the product
O

5.8 Auxiliary functions

Sound warning cancel
Drying machine makes sound warnings
when the program is completed. If you don't
want sound notifications, press the "Sound
Notification" button.
When you press the sound notification
button it lights up, and program does not
make sound notifications when completed.
C
You can select this function
before or after the program
starts.

5.9 Warning symbols

C
Warning symbols may vary
according to the specifications of
your machine.
Fiber filter cleaning
When the program is completed, a warning
led lights up, which indicates that the filter
has to be cleaned.
C
If the filter cleaning led blinks, see
the „Troubleshooting" chapter.
Water tank
When the program is completed, a warning
led lights up, which indicates that the water
tank must be emptied.
If the water tank fills up while the program
is running, warning led starts blinking and
the machine goes into stand-by. In that
case empty the water in the water tank and
start the program by pressing the Start /
Pause button. Warning led turns off and the
program resumes.
52 / EN
Loading door open
Start/Pause led blinks when the loading door
of the drying machine is open.
5.10 End duration
You can delay the end duration of the
program for up to 24 hours with the end
duration function.
1. Open the loading door and place your
laundry.
2. Select the drying program.
3. Press the end duration selection button
and set the delay duration you want.
End duration led lights up. (End duration
moves continuously when you keep
pressing the button).
4. Press the Start / Pause button. End
duration countdown begins. The ":"
sign in the middle of the displayed delay
duration blinks.
C
You can add or remove laundry
for the duration of the end
duration. The duration displayed
on the screen is the sum of the
normal drying duration and the
end duration. At the end of the
countdown the end duration
led turns off, drying beings and
drying led lights up.
Changing the end duration
If you want to change the duration during
the countdown:
1. Cancel the program by pressing the On/
Off button. Turn on the drying machine
again by pressing the On/Off button.
When your drying machine turns on
for the first time, it turns on with the
declaration (cotton wardrobe dryness)
program.
2. Select the program you desire using the
Program Selection knob.
3. Repeat the end duration operation for
the duration you want.
4. Start the program by pressing the Start /
Pause button.
Dryer / User Manual