Herunterladen Inhalt Inhalt Diese Seite drucken

Dmx Mode; Dmx-Protocol - EuroLite LED Strobe COB PRO 8x20W DMX Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Display
A001
001-512
dISP
Yes
LOdA
YES/NO
Sou1
Sou2
Au00
Au00-Au16

DMX Mode

You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the device will respond to the controller.
Addressing
Press the MODE button until the display shows A001. You can now set the desired address (001 - 512) via
the UP or DOWN buttons.
Controlling:
After having addressed the LED Strobe COB PRO 8x20W DMX, you may now start operating it via your
lighting controller.
Please, be sure that you don't have any overlapping channels in order to control each fixture correctly and
independently from any other fixture on the DMX-chain. If several fixtures are addressed similarly, they will
work synchronically.

DMX-Protocol

Channel
DMX Value Characteristic
CH1
000-255
CH2
000-003
004-255
CH3
000-009
010-255
CH4
000-009
010-255
CH5
000-009
010-255
Setting
DMX address setting
With this function, you can adjust the desired DMX-address
via the Control Board.
Display reverse 180 degree
With this function you can flip the display by 180° for a better
view when the fixture is hung from the truss or a ceiling.
Restore factory settings
With this function you can restore the factory settings of the
device.
Music controlled program 1
With this function, you can run the music controlled program
1 (single flash) sound-controlled.
Music controlled program 2
With this function, you can run the music controlled program
2 (double flash) sound-controlled.
Auto program
With this function you can select the Auto program in 17
different speeds (increasing).
Gradual adjustment of the dimmer intensity from 0 to 100 %
Blackout
Strobe-effect with increasing speed
Blackout
Running light, in pairs with increasing speed
Blackout
"Blinder effect" for 2 seconds
Blackout
Auto programs with increasing speed
19/24
Function
00124327, Version 1.2

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis