Introduction; Product Features - EuroLite LED Strobe COB PRO 8x20W DMX Bedienungsanleitung

LED Strobe COB PRO 8x20W DMX
DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires. Never open the housing. Keep the device away from rain and
moisture.
Please read these instructions carefully before using the product. They contain important
information for the correct use of the product.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are
sure that you will enjoy this device for a long period of time.

Product features

LED strobe with 8 x 20 W COB LED and adjustable flash freuquency
Operable in stand-alone mode with Master/Slave function or DMX interface
•
DMX512 control possible via any commercial DMX controller
•
Sound control via built-in microphone
•
Brightness and flash-rate steplessly adjustable
•
Comfortable addressing and setting via control board with LED display and four operating buttons
•
Switch-mode power supply for operation between 100 and 240 Volts
•
Elaborate reflector system
•
Compact housing with mounting bracket and fixation screws
•
Ready for connection via included IEC power cord with safety power plug
•
Equipped with eight powerful 20 W COB LEDs, CW
•
Ready for connection via included IEC power cord with safety power plug
•
USER MANUAL
13/24 00124327, Version 1.2