Maxwell 25521 Gebrauchsanweisung Seite 3

to the "VΩHz"
the function selector
„ ". Use the "SELECT" button
to set the measurement type. For
diode measurement, the instrument
shows the opening voltage of the
diode or "OL" in the closing direction.
In case of a break test, the instrument
outputs a beeping sound if the
measured value is less than 50 ohms.
For resistance measurements, wait
for a few seconds for measurements
of mega ohm while the measured
value is stabilized on the display. By
pressing the "RANGE" button you can
manually select the measuring range,
press and hold to return to automatic
mode. Before capacitor measurement,
discharge the capacitors in any case,
otherwise the voltage stored inside
them can damage the instrument. For
larger capacities, the measurement
may take several seconds.
Display maximum and minimum
values
After finishing measurements, you
have the option of calling the largest,
smallest, and different values. Press
the "MAX/MIN" button to display the
desired value. MAX - maximum, MIN -
minimum, MAX-MIN - difference value
Relative measurement method
During measurement,
"REL" button to activate the relative
measurement, the instrument from
there uses the previous measurement
as a starting point.
Data hold
socket. Turn
switch to During
"HOLD" button so that the measured
value remains on the display even after
removing the measuring testers. Press
again to reset the measurement.
Backlight
To turn on the backlight, press the
"HOLD" button for a long time. It will
switch off approx. after 15 seconds, it is
automatically turns off.
Automatic switch off
The instrument automatically switches
off for approx. after 5 minutes. Press
"SELECT" repeatedly to switch on.
Smart mode, wireless Bluetooth
connection
The instrument is suitable for storing
and displaying measurements on an
external device. In any mode of the
instrument, press and hold the "TX"
button for a long time. The Tx display
on the display indicates the activation
of the wireless Bluetooth connection.
An app for Android and iOS can
be downloaded from Play Market
and
MULTIMETERS"
press the
measurement, press
„MAXWELL
AppStore:
the