6. Using the curling tong
Remove all the packaging materials.
Wash your hair as normal and dry it off with a towel. For best results, use the
product on slightly damp hair that has been dried off with a towel. Brush or
comb your hair to remove knots.
WARNING!
Risk of burns/risk of fire due to hot surfaces
Parts of the product may become very hot during use.
Always take hold of the product by the handle dur-
ing operation. Never let the skin come into contact
with the hot surfaces (especially the face, ears, neck
and scalp).
Do not place the product on flammable surfaces dur-
ing use, such as cushions, blankets, towels, etc.
Allow the curling tong and the brush attachments
to cool down as a basic principle before fitting or re-
moving them.
Never use the product without the brush attach-
ment.
Where applicable, press the release button
off the product.
Fit the required brush attachment on the product until it clicks into place.
Plug the mains cable into a properly installed AC 220-240 V~ 50/60 Hz safety
socket.
NOTICE
Some hair types may be damaged from overexposure to the hot air so
be careful not to use the product for too long.
− If you have fine, dyed or damaged hair, it is advisable to use the
product for a short time on each section of the hair.
56 of 62
and take the brush attachment