Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.3.3
Display brightness when in standby mode can be set.
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu
d) Set the desired brightness (
2.3.4 Setting the volume
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu [
d) Set the desired volume (OFF, 1 to 5) using the
2.3.5
A good combustion depends on several factors (type of installation, operation and maintenance conditions, type
of pellet etc ..)
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu
d) Set one of the following values using the
"1"
"2"
"3"
e) Press
20
to go to the setup menu
[11]
OFF, 1 ... 5
) using the
to go to the setup menu
13
to go to the setup menu
[14]
and
and then press
;
and press
buttons and press
and then press
;
] and press
buttons and press
and then press
;
and press
buttons:
Werbung
Inhaltsverzeichnis
