Handling The Equipment; Instructions For Assembly - Kettler 07708-900 Montageanleitung

Assembly Instructions
GB
lar children) on possible sources of danger during exercising.
Only for appliances with weights or dumbbells. This especially
applies to the area of movement of weights and dumbbells.
■
Any interference with parts of the product that are not descri-
bed within the manual may cause damage, or endanger the
person using this machine. Extensive repairs must only be car-
ried out by KETTLER service staff or qualified personnel trained
by KETTLER.
■
To ensure that the safety level is kept to the highest possible stan-
dard, determined by its construction, this product should be ser-
viced regulary (once a year) by specialist retailers.
■
Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
ATTENTION!
While assembly of the product keep off child-
!
ren's reach (Choking hazard - contains small parts).
■
Always wear suitable shoes when using.
ATTENTION!
Before beginning your program of training, stu-
!

Handling the equipment

■
Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
■
It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■
The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.

Instructions for Assembly

■
Ensure that you have received all the parts required (see check
list ) and that they are undamaged. Should you have any cau-
se for complaint, please contact your KETTLER dealer.
■
Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
■
Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
■
Ensure that your working area is free of possible sources of dan-
ger, for example don't leave any tools lying around. Always dis-
pose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children
play with plastic bags!
4
dy the instructions for training carefully.
■
Our products are subject to a constant innovative quality assu-
rance. We reserve the right to perform technical modifications.
■
In choosing the location of the apparatus, ensure a sufficient sa-
fety distance from any obstacles. The apparatus must not be mo-
unted in the immediate vicinity of main passageways (paths, do-
orways, corridors).
■
Please observe the maximum admissible load of 150 kg.
■
Nobody may be in the moving range of a training person du-
ring training
■
This exercise machine may only be used for exercises indicated
in the training instructions.
■
The surface on which the unit is placed must be firm and even.
Place rubber or straw mats under it to deaden any noise or im-
pacts. Only for appliances with weights. Avoid powerful oscil-
lations of the dumbbells!
■
Use for your regular cleaning, maintenance and care our ap-
pliance maintenance set (Article no. 07921-000) specifically li-
censed for KETTLER Sports apparatus and available from the
Sport specialized trade.
■
Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
■
When choosing a place for the equipment please ensure that
the floor can withstand the additional weight/load.
■
Basically this equipment does not need any special maintenan-
ce.
■
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
■
The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
■
Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand un-
til resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all
screw connections have been tightened firmly. Attention: once
locknuts have been unscrewed they no longer function correctly
(the locking device is destroyed), and must be replaced.
■
For technical reasons, we reserve the right to carry out prelimi-
nary assembly work (e.g. addition of tubing plugs).