Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
START-UP
This line array system must only be connected with an appropriate power amplifier. The amplifier power must
correspond with the speaker system power. An amplifier with too little power can also destroy a speaker
system with a higher power range.
Making the connections
The speaker systems are equipped with two 4-pole, lockable Speaker sockets that are wired in parallel. This
way you can connect the input of the first speaker system to the output on your power amplifier and tap into
the signal from the amplifier on the output LINK, to feed this signal into the next speaker system. For locking
a connection turn the plug to the right. For unlocking pull the unlock button and turn the plug to the left and
pull it out of the socket.
Connection of the Speaker sockets
Subwoofer
INPUT:
1 +/- = Sub +/-
2 +/- = n.c.
LINK:
1 +/- = Sub +/-
2 +/- = n.c.
Information on installing audio cables
• A good cable run improves the sound quality remarkably. Avoid long cable runs.
• Always treat cables carefully and protect them from damages during transportation.
• Install cables always in a structured way and protect them from damage.
• Cables must be installed in a way that no person can stumble over them. Always fix cables with an
appropriate tape.
• Cables should be installed directly (no loops, S-shaped overlengths).
• Always install cables far away from power cables (never closely parallel).
• Never put heavy objects like speaker systems, flightcases etc. on cables.
• Never operate cables wound up.
4
INSTALL ATION
The line array system can be set up as desired. The location must be solid, plane, anti-slip, vibration-free,
oscilation-free, and fire-resistant. The installation area must hold a minimum point load of 5 times the
system's load (e.g. weight 20 kg - point load 100 kg).
Information on transport
CLA-212: The subwoofer features four transportation handles. The subwoofer should be carried without
force by two persons of the same size. The subwoofer can be equipped with an optional wheel board for
convenient transportation. Insert the wheelboard into the butterfly locks of the subwoofer. Rotate the handle
to lock.
Top
INPUT:
1 +/- = MF +/-
2 +/- = HF +/-
LINK:
1 +/- = MF +/-
2 +/- = HF +/-
27
Werbung
Inhaltsverzeichnis
