Advanced Settings; System Parameters - Airzone EASYZONE Schnellinstallationsanleitung

ADVANCED SETTINGS

To access the advanced configuration menu of the Blueface and Think thermostat follow the following steps:
Blueface
Press and hold
Think
Press once
From this menu you can change the system and zone parameters.

SYSTEM PARAMETERS

· System address. Use this parameter to define the system number in your installation using this parameter. The
Supermaster option (available in installations with Airzone production control board, AZX6CCP). Allows you to impose
the operation mode of the system to the rest of the systems connected to the AZX6CCP in a semi-forced way.
· Temperature range. Use this parameter to select the highest temperature in heating mode (19-30 ºC, by default 30ºC)
and the lowest temperature in cooling mode (18-26 ºC, by default 18ºC). It is also possible to disable some of the
modes.
· Combined stage. Enables activating and deactivating the combined stage of the "Control Stages" parameter in the
user's Zone Settings Menu.
Press and hold
Operation mode:
System 1
Press and hold
Available operation modes:
Rest of the systems
ES
EN
FR
IT
PT
DE
31