Airzone EASYZONE Schnellinstallationsanleitung Seite 27

Zone address
Select the zone associated to the thermostat. Each zone corresponds to a radiant element relay output. For example, zone 1
will control the relay output O1 of the Airzone Control module of radiant elements (AZCE6OUTPUT8).
Associated outputs
If necessary, the system allows you to associate more than one control output to a zone. It is possible to control multiple outputs
from the same thermostat.
Thermostat configuration
Select the operation of the thermostat:
- Master: Controls all the parameters of the installation.
- Zone: Controls all the parameters of the zone.
Control stages (only for installations with Airzone Control Module of Radiant Elements, AZCE6OUTPUT8)
Select the stages to be controlled: Air, Radiant or Combined.
Other settings
Press to conclude the initial setup procedure, or access the advanced settings menu (system address, stages of control, etc.) to
change any other setting. Activate the basic function if required (see Advanced Settings, Zone Parameters).
Blueface
ES
EN
FR
IT
PT
DE
27