Specifications; Install The Hardware; Access The Product; Reset To Factory Default Settings - Axis Q7436 Installationshandbuch

Specifications

Operating Conditions
Product
AXIS Q7436
Power Consumption
12 V DC max 16.3 W from rack/chassis.

Install the Hardware

This Axis product is designed to be installed into the following video encoder racks/chassis:
• AXIS 291 1U Video Server Rack
• AXIS Q7900 Rack
• AXIS Q7920 Chassis
Follow the instructions in the Installation Guide included with the racks/chassis for installing
this Axis product. These installation guides are available on the AXIS Network Video Product CD
included with this product, and at www.axis.com

Access the Product

Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on www.axis.com/techsup/

Reset to Factory Default Settings

Important
Reset to factory default should be used with caution. A reset to factory default will reset
all settings, including the IP address, to the factory default values.
To reset the product to the factory default settings:
1. Press and hold the control button and the restart button at the same time.
2. Release the Restart button and hold the Control button.
Temperature
0 °C to +45 °C
(32 °F to 113 °F)
AXIS Q7436 Video Encoder Blade
Humidity
10-85% RH (non-condensing)
12