Technical Data; Before Starting; Operation - EINHELL BT-VC 1500 SA Originalbetriebsanleitung

Anleitung_BT_VC_1500_SA_SPK7:_
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage:
Power input:
Max. power consumption of the automatic socket-
outlet:
Max. total power consumption:
Container volume:
Weight:

5. Before starting

Important!
b Before you connect the appliance to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
b The appliance may only be connected to a shock-
proof socket.
5.1 Assembling the appliance
5.1 Appliance assembly
Fitting the castors (Fig. 6/12)
Fit the castors (12) into the appropriate mountings on
the underside of the tank (10). Push the castors (12)
firmly into the mounting until they engage with a
clicking noise (Fig. 6).
Fitting the appliance head (Fig. 5)
The appliance head (5) is fastened to the container
(10) by the locking hook (18). To remove the
appliance head (5), open the locking hook (18) and
remove the appliance head (5). When fitting the
appliance head (5), make sure that the locking hook
(18) locks into place correctly.
5.2 Fitting the filter
Important!
Never use the wet and dry vacuum cleaner without a
filter.
Check that the filter is securely fitted at all times.
Fitting the foam filter (Fig. 7/25)
For wet vacuuming, slip the supplied foam filter (25)
over the filter basket (Fig. 2/20). The pleated filter (24)
already fitted upon delivery is not suitable for wet
vacuuming.
26.02.2010 10:10 Uhr
Fitting the pleated filter (Fig. 8/24)
For dry-vacuuming, slip the pleated filter (Fig. 3/24)
over the filter basket (Fig. 2/20). The pleated filter (24)
is suitable for dry-vacuuming only.
5.3 Fitting the suction hose (Fig. 1/9)
Connect the suction hose (9) to the corresponding
230 V ~ 50 Hz
connector on the wet and dry vacuum cleaner,
1,500 watts
depending on the application required.
Vacuuming
2,200 watts
Connect the suction hose (9) to the suction hose
3,700 watts
connector (8).
30 l
10 kg Blowing
Connect the suction hose (9) to the blow connector
(19).
To extend the suction hose (9) you can attach one or
more of the elements which make up the 2-part
suction tube (17) to the suction hose (9).
Air regulator (Fig. 1/13)
The air regulator (13) can be fitted between the
suction hose (9) and the suction tube (17). The
suction power of the nozzle can be infinitely adjusted
using the air regulator (13).
5.4 Suction nozzles
Combination nozzle (Fig. 1/14)
For dry vacuuming surfaces use the dual-purpose
nozzle (14).
Crevice nozzle (Fig. 1/23)
The crevice nozzle (23) is designed for vacuuming
solids and liquids in corners, edges and other areas
that are difficult to access.

6. Operation

6.1.1 ON/OFF switch (Fig. 2/15)
Switch position 0:
Switch position I:
6.1.2 Automatic switch (Fig. 2/16)
Switch position _ : Normal mode
Switch position = : Automatic mode
6.2. Dry vacuuming
Use the pleated filter (24) for dry vacuuming (see
point 5.2).
Always ensure that the filters are perfectly secure.
Seite 9
Off
On
GB
9