Symbols on machine and their explanation
1
2
1. Warning! Before use read carefully the
operating manual and follow the safety
instructions!
2. Danger! Rotating blades! Keep hands and feet
away from the cutting equipment! Always
switch off the appliance, disconnect the power
and wait till the machine comes to a standstill
prior to maintenance, cleaning or repair work!
3. Risk of thrown objects. Keep all persons away
from the work area whilst working.
4. Warning! Keep the supply flexible cord away
from the cutting equipment!
Wear ear defenders.
Wear safety shoes.
Wear safety goggles.
Wear protective gloves.
3
4
Your machine at a glance
► Page 2, Fig. 1
1. Operating lever
2. Handle bar
3. Handle bar, middle part
4. Handle bar, bottom part
5. Protective flap
6. Rotary knob for working depth adjustment
7. Collecting bag
8. Strain relief mechanism for extension cable
9. Operating safety lock
10. Clamping screw
What is included
•
Instructions for use
•
Scarifier
•
Handle bar
•
Handle bar, middle part
•
Handle bar, bottom part (2x)
•
Collection bag
•
Scarifier drum (only S 1600)
•
Mains plug strain reliever
•
Bag with small parts
Note:
If should any part be missing or
damaged, please contact your dealer.
Assembling
Mounting the handle
► Page 2, Fig. 2
–
Unfold the bottom parts of the handlebar as
illustrated and tighten the clamping screws
(10), or attach the bottom parts of the
handlebar with clamping screws.
–
Push the cable grip (8) onto the middle part of
handle bar (3).
–
Position the middle part of the handle bar (3)
onto the bottom part of the handle bar (4) and
push through the carriage bolts (11).
–
Apply the clamping lever (12) and tighten.
► Page 3, Fig. 3
–
Position the handle bar (2) onto the middle part
of the handle bar and push through the
carriage bolts (13).
–
Apply the clamping lever (14) and tighten.
Collecting bag assembly
–
Insert metal frame into collecting bag and fix it
inside clamping rims of collecting bag by
means of a simple rounded-off tool (e.g. a
spoon handle).
EN
31 / 49