Important Note; Technical Specifications; Safety Information - Würth WGLG 100 Originalbetriebsanleitung

This tool has been especially designed for use
with 100% butane gas
(Art. 0893 250 001)!
Read enclosed instruction manual prior to use.
Butane not included.
Soldering tip Window
Hot air
extrause hole
Tip
Power range:
ApproximatetemperatureSolderingtip/Heatblowertip/Hotknifetip:
Torch:
Capacityofgascontainer:
Operating time:

2. Safety Information

2.1 Never use a device which has damaged or
worn seals or one which contains leaks,
defects or malfunctions.
2.2 Use only in a well-ventilated area.
2.3 Use safety glasses.
2.4 Donotrefill,igniteorusedeviceneara
heater,furnace,openflameorcombustible
materials.
2.5 Do not touch the heated tip or tip housing of
the device.
2.6 Never leave the device unattended while
switched on or still hot.
BDA_Gasloetgeraet_WGLG100.indd 5

IMPORTANT NOTE

On/Off
Knurled nut
ignition control
Tip
switch
housing
1.­Technical­Specifications
Gas
Gas tank
lever
30–100 W
250∼500°C(480∼950°F)
1300°C(2400°F)
20ml
120 mins at medium setting
2.7 Do not replace cap without switching device
offandensuringtiphascooleddown.
2.8 Always be sure that the device has cooled
down before storing.
2.9 Storage: In a safe, dry place far from heat
sources and well out of reach of children.
2.10 Do not attempt to readjust or repair.
2.11 Do not expose the device to the sun or to
temperaturesexceeding+50°C(+120°F).
Cap
Filling
valve
5
18.11.11 11:28