AEG Voxtel R320 Schnellstartanleitung Seite 9

• Press the menu button
number flashes on the LCD screen.
• Press the up
sub-channels.
• Press the PTT button to confirm the sub-channel setting.
4.3.2
Each channel also has 83 digital codes to let you set up group of users
for more secured private communication.
• Press the menu button
screen.
• Press the up
• Press the PTT button to confirm the DCS channel setting.
!
4.4
The unit is continuously in the receive mode when the unit is turned on
and not transmitting. When a signal is received on the current channel,
RX
lights up.
4.5
• Press and hold the PTT (push to talk) button to transmit your voice.
TX
• Hold the unit in a vertical position with the microphone 5 cm away
from the mouth. While holding the PTT button, speak into the
microphone in a normal tone of voice.
• Release the PTT button when you have finished speaking.
4.6
You can use the monitor feature to check for weak signals on the
current channel.
AEG R300_V1.indd 9
or down
Setting the DCS advanced digital code
or down
Transmitting and receiving
• The PMR transmission is "one way-at-a-time." While you
are speaking, you can not receive a transmission.
• The PMR is an open-license band. Always identify yourself
when transmitting on the same channel.
Receiving
icon will be displayed on the LCD screen and the receiver LED
Transmitting (sending a speech)
icon will be displayed on the LCD screen.
Monitor
twice, the current CTCSS sub-channel
button to select one of the 38 CTCSS
3 times. DCS code is blinking on the LCD
button to select the desired DCS code.
9
29/06/2012 21:56:54