AEG Voxtel R320 Schnellstartanleitung Seite 4

4
10
11
2.2
DCM
DCS
SCAN
AEG R300_V1.indd 4
Up / down buttons
/ • Press to change channels, volume and to select
settings during programming.
Speaker
LCD screen (see P2)
Channel number.
Changes from 1 to 8 as selected by the user.
CTCSS code.
Changes from 1 to 38 as selected by the user.
Displays the battery change level. When the bars are
reduced, the battery needs recharging.
Displayed when transmitting a signal.
TX
RX
Displayed when receiving a signal.
Displayed when the dual watch function is turned on.
Displayed when the Digital Code System is turned
on.
VOX Displayed when the VOX feature is enabled.
Displays when the PMR is scanning all channels.
Displayed when the key lock feature is activated.
Displays the current speaker volume level.
Meaning
29/06/2012 21:56:53