Installing An External Ion Exchanger - clage Zip Hydroboil Plus series Gebrauchs- Und Montageanleitung

Zip Hydroboil® Plus
4. Installation
EN
Filter head article number: 84519
Filter cartridge (capacity at 10 °dH)
article number: 84500 = 4200 ltr
article number: 84501 = 8500 ltr
article number: 84502 = 20000 ltr

Installing an external ion exchanger

An external ion exchanger should be used from 10 °dH to reduce limescale deposits in
the hot water tank of the appliance and thus extend the maintenance intervals.
Note: If installing an external ion exchanger, follow the instructions supplied for
the filter head and filter cartridge.
Note: to flush through the ion exchanger before using it for the first time, connect
it directly to the angle valve and drain the water into a bucket or drain (depend-
ing on the size: 500 = 2-3 min, 1000 = 3-5 min, 2000 = 5-7 min).
1. Connect the angle valve to the water inlet of the ion exchanger.
2. Connect the water outlet of the ion exchanger to the cold water inlet of the
Hydroboil appliance.
20