Care And Maintenance; Troubleshooting Guide - North Light JY-0004A-20W-PIR Bedienungsanleitung

Sensor light sensitivity level [SENSOR LEVEL]
• The sensor has a photocell that detects various degrees of light and darkness.
The photocell's sensitivity level can be adjusted by turning the [SENSOR LEVEL]
knob e.g. in the direction of the arrow to increase sensitivity and against the arrow
to reduce sensitivity. Turn the knob in the direction of the arrow to activate
the detector for brighter lighting conditions.
Adjusting the light's, detector's and solar cell's angle
1. Adjust the light and sensor's angle to
the desired position.
2. Adjust the angle of the solar cell so that it can
utilize as much available sunlight as possible.

Care and maintenance

Clean the wall light using a lightly moistened cloth. Only use mild cleaning agents,
never solvents or corrosive chemicals.

Troubleshooting guide

The wall light doesn't
come on.
The wall light comes
on randomly.
• Make sure the [OFF-ON-PIR] switch (7) is in the ON
or PIR position.
• The batteries are flat. Charge the batteries.
• The power cable between the solar cell and wall light
is damaged or is not properly connected to the wall
light's power socket.
• See the Placement section above.
6