dB Technologies RPS 10 Bedienungsanleitung Seite 5

1 DESCRIPTION
RPS 10 is an intelligent Power Supply Unit which can provide power supply (12V) to multiple devices
on a Touring Rack system, ensuring overcurrent protection on each output.
RPS10 has been developed to work with HUB800, from which it is possible to check the operating
status and intervene enabling or disabling the single supply outputs separately.
2 COMMANDS AND FUCTIONS
2.1 FRONT PANEL
1) MAINS SOCKET "MAINS"
Allows connection of power cord supplied.
RPS10 is an equipment with Class I construction and for his functioning must be
connected to a mains socket outlet with a protective earth connection.
2) Fuse Holder "FUSE"
Mains fuse housing. Replace only with identical value.
3) General Power switch "POWER"
General power switch to switch the device on or off.
4) "POWER ON" General power indicator
This light glows green to indicate that the device is powered.
5) "HUB" Power indicator
This indicator light glows red to indicate that the device HUB800, connected to RPS10,
is powered.
6) Receivers power indicator
These lights glows in red to indicate when the MOVING D R receivers, connected
to the RPS10, are powered.
7) "AS6W" Power indicator
This indicator light glows red to indicate that the device AS6W, connected to
is powered.
8) "AUX" Power indicator
This indicator light glows red to indicate that the Auxiliary device, connected to RPS10,
is powered.
9) "FAN" Power indicator
This indicator light glows red to indicate that fans are running.
ENGLISH
RPS10,
4