Default Setting - Optika OPTIKAM HDMI EASY Bedienungsanleitung

1.13 Format Micro-SD Memory Card
If the Micro-SD card is not working properly or it needs to be formatted please press the "Menu" button and
choose "Format", the choose "OK", now the Micro-SD card will be formatted.
PAY ATTENTION : All the datas on your Card will be erased.
1.14

Default Setting

Press the "Menu" button and choose "Default Setting ", now choose "OK" to get the default parameters.
How to use your HDMI with the PC
If you connect the camera to a computer with the USB Cable the TV preview will be disconnected, the USB con-
nection has the priority.
Please also note :
1.
The USB camera needs the power adapter plugged in and the camera itself turned up
2.
If there is a plugged in Micro-SD card the USB cable will be used to control the Micro-SD, so for using the
USB camera in live view on the PC please remove the Micro-SD card before.
Power off your HDMI camera
Press and hold the "ON/OFF" button for more than 5 seconds, then the camera saves all the parameters and
turns off.
Page 7