Optika OPTIKAM HDMI EASY Bedienungsanleitung Seite 6

1.5 Freeze/Unfreeze
In preview mode press the button "ON/OFF" for freezing the preview image.
1.6 Auto/Manual Exposure
In preview mode press and hold the "MODEL" button to switch the exposure from Auto to Lock mode.
1.7 Exposure
Press the "Menu" button and then choose "Exposure", now press "UP" or "DOWN" buttons to change the EV
offset for increasing or decreasing the exposure.
1.8 Image Color
Press the "Menu" button and choose "Color ", now press "UP" "DOWN" buttons to change the image effect from
Color to Gray or Sepia.
1.9 Line set
your HDMI Easy camera provides eight lines , all of them can be shown horizontally or vertically and the position
of them can be changed, into details you can set as follows:
1.9.1 Line set into details
Press the "Menu" button and choose "Line Set" , then choose "Line", now you can press "MODE" or "OK" button
to the number of line you want to show.
•
You can choose the line direction by changing the "Line DIR" parameter.
•
You can change the position of the line by changing the "Line Position" parameter.
•
You can change the color of the line by changing the "Line Color" parameter.
•
You can change the size of the line by changing the "Line Weight" parameter.
1.10 Crosshair
Press the "Menu" button and choose "Line Set", now select "Cross Hair " and press "MODE" or "OK" button for
activating the cross.
1.11 Language
In preview mode select the "Menu" button and choose "Language", the languages interfaces appears with ten
available languages.
1.12 Light Frequency
In preview mode press the "Menu" button and choose "Frequency", now you can select the right current fre-
quency in your country, this reduces the image flicker behaviour if appears.
Page 6