Genius NicerDicer Plus Gebrauchsanleitung Seite 22

batons/dices
quarters/
eighths
22
Pos. 1
GB
+
CAUTION!
Cutting into eighths
Instruction Manual
Insert the desired blade insert. The insert must audibly lock into
place. Please ensure that you do not touch the blades during use.
Position 1.
EXCEPTION: Cutting into eighths (see next section).
Click the x-shaped fastener on the back of the cutting stamp for
Place the blade insert for quarters/ eighths in the cutter base so that
the cutting surface for eighths is in Position 2.
The cutting stamp must only be used with the blade insert for
quarters/eighths. If another blade insert is being used, the cutting
stamp may NOT be used, or must be removed before use.
Pos. 2
Pos. 2
Always fit the blade insert so that the required cutting surface is in
eighths firmly into the struts on the inside of the cutter top.
+
+
+
+