Scheduled Recording - Bpt XNVR2816 Gebrauchsanleitung

SCHEDULE
This window lets you schedule recordings. There are four different recording modes.
Manually record by pressing REC on the NVR. To end recording, press REC again.
☞
You can use the mouse to start/end recording by clicking REC on the tool bar.

Scheduled recording

The recording starts and ends at the preset times.
From SETUP select SCHEDULE. Click on
Double clicking on the grill brings up the weekly scheduling window. on WEEK DAYS select the day and click ADD to set up the recording starting and
ending times.
Click COPY to copy the settings you have just made to other days. Select OL to save the weekly schedule.
The scheduled recording procedure needs to be done for each CHANNEL, but you can also set the same schedule on all of the channels by selecting
APPLY SETTINGS TO ALL and clicking COPY.
Record on movement
Recording activates when a sensor detects any movement.
From SETUP select MOTION.
to schedule recording. Click on to cancel scheduling.