Bpt XNVR2816 Gebrauchsanleitung Seite 25

BASIC: to set up the video system, the language menu, the audio, the time and the authorizations control.
LIVE: to set up the NAME/TIME to view, the images' color and hide the videocameras.
RECORD: to set up the recording quality, the photograms' frequency, the resolution, time and recycling.
SCHEDULING: the schedule recordings, motion detection, and the alarm.
ALARM: set up the sensor type, alarm and buzzer activation.
NETWORK: to enable the feature, configure the IP address, the DDNS and the video transmission parameters.
USERS: to add, delete or modify their authorizations. This procedure can only be done by the administrator.
ADVANCED: to relaunch the NVR, import and export data from/on external hard drives.
NETWORK
To preview live images from NVR, you need to configure the NVR's network and then add the IP videocameras.
☞
The NVR must be connected to the LAN, WAN or internet.
LAN
From SETUP select NETWORK.
Enter the following data
http port: preset 80
SERVER port: preset 6036
IP ADDRESS
SUBNET MASK
GATEWAY
If using the DHCP, you need to enable it on both the NVR and ROUTER.
Click on TEST, to verify whether the network is efficient.
Click on APPLY
From MENU, select IP CAMERAS.
Click on SEARCH to find devices that are on the same network.