PROCEDURE FOR ASSEMBLING RETAINING CLIPS ON WEIDMÜLLER QUICK FIT CONNECTORS
•
Insert the retaining clip as shown in the gure.
•
Fit the male connector into the female
connector.
Note: After assembly, the retaining clip cannot be removed.
Once the male connector has been tted to the female connector equipped with the clip, they can only be
disconnected using the speci c tool illustrated in the gure below:
MULTICONTACT
Note: The disconnection tool for MC/WM connectors can be obtained from any Power-One products distributor.
Photovoltaic Inverters
DISCONNECTION TOOL FOR RETAINING CLIPS
5 - APP
WEIDMÜLLER