Levita HT 550 Benutzungs- Und Wartungsanleitung Seite 30

DEFECTS
The below stated table includes individual defect types and the manner of their repair.
If you are not able to locate the defect using this table, contact an authorized service
company.
Warning:
Prior to conducting any repair, disconnect the machine from power.
Defect
The hedge trimmer
is not working
The hedge trimmer
does not run conti-
nuously
The motor is ru-
nning but the bla-
des are not moving
Blades are excessi-
vely heating up
DISPOSAL
Once your machine's life time is over or when you do not need it any more, do not dispose
of it by throwing it into communal waste. Liquidate it in an environmentally-friendly way
instead. Take it to a collection facility that is involved in environmentally-friendly
liquidation process. Such a facility is able to separate the machine metal parts from
plastic parts and to arrange their further processing. You can obtain more information
regarding this issue from your municipal or local authorities.
Possible cause
There is no power
Defective outlet
Fuse
Damaged electric cord
Bad internal contact
The ON/OFF switches are
defective
Internal defect
Dull blades
Notches on the blade
Excessive friction as a result
of insuffi cient lubrication
EN
Repair
Inspect the given power supply.
Try a different power outlet; repla-
ce the power outlet of necessary.
Inspect the cable and, if needed,
replace it (contact an authorized
service company). Replace the
fuse.
Inspect the cable and, if necessa-
ry, replace it (contact an authori-
zed service company).
Contact your supplier
Contact an authorized service
company.
Have the blades sharpened
Inspect the blade edge
Apply the maintenance spray
30