Noise And Vibrations; Safety Instructions - Levita HT 550 Benutzungs- Und Wartungsanleitung

NOISE AND VIBRATIONS

The measured acoustic values have been determined pursuant to EN 60745.
The overall acoustic values (three-axis summative measurement) have been determined
pursuant to EN 60745.
The level of vibration emissions, stated in this information sheet, has been measured
pursuant to the standardized test specifi ed in EN 60745 and it can be used for compa-
ring the given tool with other types.
It can also be used for a preliminary assessment of the operator's exposure to vibrations.
The declared level of vibration emissions applies to the main purposes of the tool use.
Shall the tool be used for different applications or with different accessories, or shall its
maintenance be unsatisfactory, the vibration emissions levels could be different. This
situation could result in an increased exposure during the entire work period.
When estimating the operator's exposure level to vibrations, the time when the tool is
turned off or running idle should be also taken into consideration. It could signifi cantly
reduce the level of the vibration exposure during the entire work period.
In order to protect the operator from the impact of vibrations, you should also determine
additional safety measures such as tool and accessories maintenance, keeping arms
warm and work organization samples.

SAFETY INSTRUCTIONS

Warning! Carefully read the below stated instructions and acquaint yourself with the
hedge trimmer's control elements and correct use procedures. Not complying with these
instructions could result in serious injuries. When using power tools, observe the general
occupational safety principles as well as the below stated safety instructions. By doing
so, you will reduce the risk of fi re, injuries caused by electric current and other injuries.
Store these instructions at a safe location, making sure you can access them at any time.
EXPLANATION OF THE SYMBOLS ON THE HEDGE
TRIMMER
1. Important warning! Carefully read the operating manual. Thoroughly observe
all safety instructions.
2. Always wear eye and ear protection!
EN
23