AEG Electrolux DI 9993-M Bedienungsanleitung Seite 19

EN
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood
to the chimney using either a flexible or rigid pipe
the choice of which is left to the installer.
To install a ø 150
• To install the dumper 10a ø 150.
• Fix the pipe using the pipe clamps 25(not in-
cluded).
To install a ø 120
• To install a ø 120 mm air exhaust connection,
insert the reducer flange 9 on the dumper 10a.
• Fix the pipe using the pipe clamps 25(not in-
cluded).
• Remove any activated charcoal filters.
RECIRCULATION VERSION AIR OUTLET
• Fix the connection 15 to the frame using the
4 screws provided.
• Fix the flange 10 to the lower opening of the
connection 15.
• Connect the hood air outlet to the flange in the
lower part of the junction using a rigid or flex-
ible ø 150 tube (by installer's choice).
�����
��
���
�����
��
�
���
��
��
19