Hama 00062765 Bedienungsanleitung Seite 25

Wired Equivalent Privacy
the network and guarantees the integrity of the data. This method is considered vulnerable due to a range of
weaknesses. Authentication is implemented using the shared key method.
If you use WEP encryption, select
Click .
In the lower area, you can save 4 codes of which only one is used. This allows you to change the code
regularly if the other wireless LAN devices also support this. You can also enter just one code and use it all
the time.
The code selected under
64 bit Hex (10 characters) = 231074a6ef
64 bit ASCII (5 characters) = j31n!
128 bit Hex (26 characters) = 231074a6b9773ce43f91a5bef3
128 bit ASCII (13 characters) = urlaub2006!+0
Click to save your settings.
24
is a standard encryption algorithm for WLAN. It both controls the access to
The entries you make here must be exactly the same as the
encryption data in the target network, i.e. in the wireless
LAN router/access point in infrastructure mode and as all
client WLAN devices in ad-hoc mode.
In the upper area of the window you can set the characters
which can be used for the code.
characters from
except spaces to be used. The setting and the selection of
either 64, 128 and 152 bit encryption determines the length
of the code to be entered.
is always transferred.
.
allows