Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The following information confi rms the selection of the confi guration assistant. The software provided
with the stick or the Windows ® software can be used. We advise you to use the software provided with
the stick. Click
A message appears informing you that the driver is being installed automatically:
The message that the software has not passed the Windows® logo test may appear while the driver is being
installed:
After installation,
restart the computer by selecting
After the restart, you can confi gure the WLAN adapter.
If you are already somewhat familiar with the confi guration of wireless LAN devices, this quick guide should
be enough to prepare the device. If you have no experience with wireless LAN devices, please read the
comprehensive instructions from page 18.
1.
Open the wireless LAN confi guration utility by clicking the
Desktop or under
2.
Change to the
3.
Select the required network in the list and click
4.
Name the profi le in the next window. Switch to the
5.
Select the encryption mode used in the target network and then click
in the target network, switch to the
and select
This only means that the test has not been performed. The sta-
bility and function of the driver was tested thoroughly before
delivery. The qualifi cation of the drivers by Hama means that
new versions can be used far earlier and do not have to wait
for the Windows® logo test. Click
the message.
tab and click
Click
you have already connected the stick.
is displayed. Now remove the CD-ROM from the drive and
!
!
tab.
tab and ignore item 6.
and click
to confi rm.
to confi rm straight away as
to confi rm
and clicking
.
on the
.
. If no encryption is used
17
Werbung
