Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.
Enter the code required for the target network in the subsequent window. Switch to the
7.
If you want to connect to an access point or router, we recommend that you leave all settings on this
page as they are. If you want to connect to another wireless LAN client device, e.g. a USB stick or card
bus, select Ad-hoc as the
8.
Click
to confi rm your entries. Switch to the
is displayed here. A green bar for the
network.
If no connection is displayed, or if you want comprehensive instructions, please read on under "The confi gu-
ration program – introduction and operation".
Open the wireless LAN confi guration utility by clicking the
or under
All profi les saved are shown in the window at the top left. Initially, only the
Details on the selected profi le are displayed in this list. The right part of the window there are various buttons
for editing profi les.
The
button allows you to add created profi les to a list of
18
and the same channel used by the client device under
tab. All current information on your profi le
shows that you are connected to the target
This view gives you information on various settings of your
wireless LAN. If the target network to be connected is not
encrypted, the WLAN device may already have automati-
cally connected to an available network. If this is the case,
the signal strength display at the bottom of the screen
shows a signal.
Change to the
When confi guring your USB stick, it is useful to create
a profi le. A profi le serves to save various settings for a
connection under a certain name. For example, if you want
to connect to various wireless networks, you can save the
settings for the networks in profi les, which allows you to
change the confi guration quickly.
tab.
.
on the Desktop
.
tab.
is saved here.
.
Werbung
