Important User Information - Peltor H510B Bedienungsanleitung

(G) Collapsing the collapsible headband:
(G:1) Press the cups all the way in.
(G:2) Collapse the headband. Make sure there are no creases in the ear cushions and that they
lie snugly against one another. For instructions for use, see the Headband section.
(H) Helmet attachment
Fit the helmet attachment in the helmet's slot until it snaps into place (see fig H:1). To switch
from ventilation to operational position, press the wire bands inwards until you hear a click on
both sides. Make sure that the cup and band wires in working position do not chafe against the
insert or the edge of the helmet, which may cause leakage.
Do not store the hearing protector in ventilation position on the helmet (H:4). This can damage
the ear cushion or the attachment on the helmet.
Note: The cups can be placed in three positions: (H:2) operational position, (H:3) ventilation
position and (H:4) parking position.

IMPORTANT USER INFORMATION

The hearing protector must be fitted, adjusted, cleaned and maintained according to the
instructions in this manual.
• Wear the hearing protector 100% of the time to ensure full protection.
• Clean the outside of the hearing protector regularly with soap and lukewarm water. Do not
immerse in water.
• Do not store the hearing protector at temperatures above +55ºC, for example behind a
windscreen or window.
• Certain chemical substances may damage this product. For more detailed information,
contact the manufacturer.
• The hearing protector, and in particular the ear cushion, may wear out over time and should
be inspected regularly for cracks or noise leakage.
NOTE that if these recommendations are not followed, both attenuation and function may be
impaired.
(I) ATTENUATION RATINGS
Peltor hearing protectors are tested and approved according to European standard EN 352-1 and
EN 352-3.
Explanation of the attenuation rating table:
1. Weight. 2. Frequency in Hz. 3. Mean rating, attenuation in dB. 4. Standard deviation in dB.
5. Calculated attenuation value.
(J) Helmet combinations
Approved combinations of Peltor hearing protectors and helmets according to EN 352-3.
3