How To Set Pitch; Pairing Bluetooth To The Stereo System; Specifications - THOMSON TT450BT Bedienungsanleitung

• During record playback, feedback could occur if the volume is too loud. If this happens, lower the
volume of the amplifier.

How to set pitch

• When the external adapter is connected and powered, turn the pitch function on automatically.
• Use the pitch adjust knob in conjunction with the pitch to vary the platter's rotational speed by as
much as +/- 50%.

Pairing Bluetooth to the Stereo System

About Pairing
• To connect the turntable to a Bluetooth receiver device, the turntable needs to pair with the device.
Once it is paired, you will not need to pair it again with that device.
How to Perform Pairing
• First, set the Bluetooth receiver device to pairing mode.
• After connecting the turntable's power cable plug to an outlet, switch BT to the ON position on the
back panel. The turntable is ready for connection.
• When the pairing is successfully performed, the Bluetooth receiver device will show the Bluetooth
connection sound or its indicator will turn blue.
• Switch BT to the OFF position on the back panel. The turntable will cut off the connection.
When playback finishes
• Slightly lift the cue lever or the headshell hook and return the tone arm to its resting position.
• Turn the START/STOP rotation knob to STOP the turntable. When the turntable stops, the blue LED
will also switch off.

Specifications:

Operating voltage
Power consumption
Dimensions (L*W*H)
Unit weight
Driving method
Speeds
S/N ratio
Cartridge type
Needle
-
DC 12V 1A
---
0.5 W in standby;1.5 W in operation
450 x 145 x 360 mm
4.58 kg
Belt drive
33-1/3 and 45 RPM
35 dB
MM
Audio Technical AT-3600L
- EN 9 -